AntMiner L3++ 580MH/s @ 1.6W/MH ASIC Litecoin [Scrypt] Miner

  • The AntMiner L3++ is a 580MH/s Scrypt miner that succeeds the older AntMiner L3+. The first batch was delivered to our location in Michigan on May 4th, 2018 and is shipping to customers immediately.
  • Based on the most reliable Litecoin (or other Scrypt-based coin) ASIC miner commercially available!
  • Hash Rate: At least 504MH/s. Final specifications are not yet known.
  • Power Consumption: 800W ±10% (Power supply sold separately)
  • Built-in controller - No separate host computer required for operation.
  • Power supply sold separately. AntMiner APW3++ recommended.
  1. Each AntMiner L3++ requires NINE 6-pin PCI-e connectors for 12V DC input (must be very stable power supply) There are four hash boards that require two 6-pin PCI-e connectors each and one additional 6-pin PCI-e connector on the controller. All NINE 6-pin PCI-e connectors are required. Do not connect more than one PSU to the same hash board to prevent possible damage and instability.
  2. Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter.
  3. Power supply unit is NOT included. Bitmain recommends the APW3++ power supply for the AntMiner L3++.
  4. AntMiners are LOUD. The L3++ sounds like a vacuum and is not recommended for use within homes.